Steeda's Ultimate Induction Power Pack is a complete performance package that includes Steeda's Cold Air Intake with High Flow Inlet Elbow and SCT Tuner.
Steeda's new Cold Air Kit for the S197 produces the greatest power gains of any Cold Air Kit on the market. Testing has shown increases of up to 38 HP and 30 ft lbs of Torque to the rear wheels!
The kit is supplied with a stainless steel air box with built-in velocity stack. It mounts in the factory location with the supplied rubber trim to seal it against the hood & fender to keep the hot air out . Our tests showed inlet temps a mere 5 degrees above ambient temperature. The Steeda Lifetime Filter can easily be cleaned and re-oiled, making maintenance a snap. All hardware required for installation is included in the kit.
Independent test results have proven gains of over 4 HP and 5 ft/lbs of Torque over the entire RPM range of the so called 'leading brands'.
Used by the top tuners in the industry.
"SCT has seen the highest horsepower and torque results while using Steeda's Cold Air Kit, over any other brand." - Chris Johnson, President of SCT Tuning
Note: Use of Steeda's Cold Air Intake REQUIRES a tune under any application.
555-3120 - Steeda Cold Air Kit
555-3130 - Steeda High Flow Inlet Elbow
388-3015ST - Steeda/SCT XCalibrator 3 w/ Tune
Increase horsepower and torque!
Tuning eliminated factory throttle lag, greatly improving throttle response
Lifetime use filter
Stainless steel housing and shield
Velocity stack air inlet guide design for reduced air turbulence and improved airflow